Sillas Motorizadas / SWITCH-IT / Head Controls / Switch-It Switched Head Arrays

Switched Head Arrays

Switched head control

Switch-It traditional switched head arrays use zero-touch proximity sensors which are specifically designed for power wheelchair application and are less susceptible to interference from high electromagnetic fields generated by power wheelchairs.

The HDR-4M2 is a 3-switch head array with two ⅛" monojack ports for a dedicated external mode switch to provide the 4th and 5th functions as desired. HDR-5 is a 5-switch head array with a dedicated sensor for reverse (choose -RL for reverse on left wing or -RR for reverse on right wing) and a dedicated sensor for mode in the opposite wing. A dipswitch panel on the back of the head array gives the ability to turn the sensor on or off.

Find Your Local Dealer VER PRECIOS
Switch-It Switched Head Arrays
Lateral Pads

Lateral Pads

The switched head arrays may be configured with the following lateral pad combinations:

  • S-S: Short, straight wings
  • S-C: Short, curved wings
  • L-S: Long, straight wings
  • L-C: Long, curved wings

The 5-switch head array is only available with long, straight wings due to sensor placement and activation area tolerances.

Mode Switches

Mode Switches

Several mode switch types and mounting options are offered for use with the switched head arrays. The Egg Switch, MicroLite, and Piko may be mounted on a rigid swing-away rod (12" long). A fiber optic switch mounted in a flexible gooseneck is another option.

Dimensiones
Dimensiones:Activating Surface:
  • Backpad: 2" x 1" (50 x 25 mm)
  • Long lateral pads: 4" x 2" (100 x 50 mm)
  • Short lateral pads: 2" x 1" (50 x 25 mm)
Product Information
Model Number:HDR-4M
HDR-5
HCPCS Code:E2312
Rendimiento/Pesos
Alternative Control Type:Switched
Activation Type:Proximity
Feedback:Wheelchair Movement
Connector:DB9 Connector to Wheelchair Omni or Enhanced Display
Compatibility:
  • Penny and Giles R-Net (Omni Display from wheelchair manufacturer is required)
  • Quantum Q-Logic electronics (Enhanced Display from wheelchair manufacturer is required)
  • Not compatible with Invacare electronics
Mode Switch Inputs:
  • Proximity Flex Switches
  • Mechanical switches (i.e., Egg Switch, MicroLite, Piko) into Omni or Enhanced Display
  • Fiber optic systems (1FBOS, 2FBOS)
Mounting Options:Headrest mounting hardware included: ½" square hardware with 1" mounting ball or Whitmyer hardware (Axys) with ¾" mounting ball. Other mounting hardware available upon request for an upcharge.

Nuestros productos están en constante proceso de mejora, por lo que Sunrise Medical se reserva el derecho de cambiar el diseño de los mismos y las especificaciones indicadas sin previo aviso

Documentación